![](../pic/other/2024-6-20-22-15-55.jpg)
10 Differences in Servo Motor VS Stepper Motor
The Servo motor consists of a motor, a control unit, and an encoder or a resolver, one kind of closed-loop control system. it is designed to precisely control the position and velocity. The servo motor has gearboxes for generating high-speed torque. we often see AC servo motors and DC servo motors.
A Stepper motor is a type of brushless DC electric motor, that can divide a full rotation process into a number of equal steps or increments, The motor's position can be precisely controlled without the need for a feedback mechanism. we often see permanent magnet (PM) stepper motors, variable reluctance (VR) stepper motors, and hybrid stepper motors.
What are the basic application differences between servos and steppers? Where would you choose one over the other? This short 10 point guide, offers a simple non non-technical explanation of the differences between these positioning technologies and attempts to de-mystify the subject, putting straight many misconceptions.
1.Torque comparison of steppers and servos:
Many people believe stepper motors do not have the torque capacity of servo motors. This is not necessarily true. The nominal torque of a stepper motor is very similar to a servo for a comparable frame size. Of course a servo has an additional time dependant peak torque rating and their speed curve is considerably more flexible and has higher performance than a stepper. If a stepper solution is correctly sized, it offers a real low cost alternative to a servo.
2. Good applications for steppers:
Servo motors, despite many claims, are not always the best performance choice for applications. The structure of a stepper motor means that positions are discrete steps in its revolution cycle. If an application requires very good stand still stability, for instance positioning a vision system, a stepper will always be better than a servo. Servo motors resonate backward and forwards at a standstill, giving them their positioning characteristics; stepper motors stay very stableat standstill.
3. When is a servo not a servo?
The term servo, often refers to a system with closed-loop feedback, hence a servo motor is really only a servo when coupled to the drive to close the loop.
This also means that any motor type can be built into a servo system to offer a cost optimized servo system. Such low-cost servos utilize stepper motors to give all the functionality of a servo at 50% of the cost with speed being the only drawback.
4. What to watch on a stepper application:
Certain characteristics of a stepper motor necessitate a careful selection on applications. The torque curve of a stepper is very short with high RPMs leading to a drop-off in torque quite quickly. Very low speeds on steppers also offer low torque; therefore vertical applications where the motor holds a load stationary are often not suitable for steppers. Applications that require very smooth steady speed are also difficult with steppers due to the resonance created by the discrete steps; this however can often be improved by micro-stepping or closing the loop.
5. What is micro stepping?
How can a motor with only 200 steps offer 200,000 positions in one revolution? The stepping driver that gives the motor the correct power and phases for its task is the product that contains the micro-stepping function. By varying the current between 2 poles in the motor we can affect the rotor position between the two poles. If the driver gives 50% of the current to each pole, the rotor will be exactly halfway between the poles, therefore offering half steps. Many drivers can offer 1/1000 steps, therefore increasing the resolution considerably. Be careful, micro-stepping has a negative effect on the torque curve for stepper motors, reducing the torque by as much as 30%.
6. "Torque the torque":
One major advantage of servo motors is their ability to control their torque in the application.
Stepper motors operate constantly at full torque, therefore making it impossible to utilize them in applications where force or torque control is required. If a servo motor is connected to a ballscrew drive, the application can offer precise force control for pushing a product or press fitting products together in assembly. However, closed-loop stepper systems do have the ability to offer torque control.
7. Size is everything:
Servo motors and stepper motors are sized in EXACTLY the same way. Care must be taken to ensure that the torque requirements for the stepper motor during acceleration (the most power-hungry phase of the movement) lies within the nominal torque curve of the motor.
Servo Motors have more flexibility as the acceleration torque generally can lie in the peak torque curve of the servo motor and only the Root Mean Square torque of the overall cycle needs to lie within the nominal torque curve.
8. Sizes for all applications:
Remember, the majority of stepper and servo motor manufacturers offer the same frame size motor in differing lengths. This feature allows different torques and inertia values to be obtained by the same size motor, allowing a greater degree of freedom in selection. It also allows greater performance without increasing the motor size and therefore the cost significantly, resulting is a solution that is more cost-effective, lighter and with smaller installation space. By keeping the frame size smaller and increasing the length, any costs of additional gearboxes are reduced significantly too.
9. Don’t use a sledgehammer to crack a nut.
Many servo motors are attached to mechanical actuators such as belt drives to convert the rotary motion to linear motion. Often stepper motors are ignored for this application on the presumption that they are too slow. However, belt drives generally have long travel distances per revolution, with many medium sized belt drives moving 100mm per rev.
For a relatively fast movement of 2 metres/sec., the motor would have to rotate at only 1200 rpm well within the scope of a good quality stepper motor. A servo motor with 12000 rpm performance, would offer a top speed of 20 metres/second, far faster than any belt drive can travel. Don’t over specify the application when you do not have to!
10. Power equals performance:
On both stepper systems and servo systems, the more current you have, the more torque is generated by the motor. If a 100mm frame size servo motor is the only size that will fit the application space, then using a 3-phase 400V AC drive will offer significantly more torque than a 240V AC variant. Similarly, with a stepper drive, you have the choice of varying the DC voltage to the drive, many systems work on 24V DC, 48V DC or 72V DC, obviously a 72V power supply will offer an increase in performance on 24V.
One advantage of a stepper drive is the amount of torque that can be generated from a simple 48V DC power supply, meaning the drive is running at a safe supply voltage, adding the benefit of safe and easy maintenance.
In my opinion:
Stepper Motors are generally operated under open-loop control. Servo Motors offers constant positional feedback. The closed-loop configuration that Servo Motors offers allows the motor to generate faster speeds and up to three times the torque than their Stepper counterparts.
At high speeds, Stepper Motors typically have poor torque characteristics. Comparing similar sizes, Servo Motors can generate speeds and power anywhere between two and four times the speed of a Stepper Motor.
Servo motor accuracy, resolution, and reaction are much higher than stepper duo to encoder used and closed-loop control.
Stepper Motors are commonly recommended for applications that are cost-sensitive and low maintenance. Steppers provide stability and flexibility; they do not fluctuate in positioning, especially under dynamic loads, and can be run in open or closed-loop configurations. If run within their specifications, no encoders are needed.
Servo Motors are recommended for high-speed (typically greater than 2,000 RPM) and high-torque applications requiring dynamic load changes. Servo Motors require higher maintenance and a more complex setup but does not create vibration and/or resonance issues like Stepper Motors may.
A Servo motor is more expensive than a stepper motor. The suitable machine is the best. Suitable configuration is the best. Usually, big size machines, auto tool change machines, big mould-making CNC routers, and 4-axis CNC routers adopt servo motors, normal CNC routers, CNC laser cutting machines, and CNC plasma cutting machines generally use stepper motors.
If anything we can help with CNC machine spare parts, welcome to contact us, we will do our best to support you.