2963718 Phoenix Contact PSR-SCP- 24UC/ESM4/2X1/1X2 - Safety Relays

2963718 Phoenix Contact PSR-SCP- 24UC/ESM4/2X1/1X2 - Safety Relays


• 2963718 Safety relays

• PSR-SCP- 24UC/ESM4/2X1/1X2 - Safety relays

• Safety relay modules and sensors

• Phoenix Contact 2963718 Safety Relay, E-Mech

• Electrical Components PHOENIX 2963718

• Industrial Relays

• Phoenix Contact PSRclassic PSR-SCP Emergency Stop Safety Relay

• Safety relays

Phoenix Contact 2963718 Safety Relay, E-Mech, 2 NO, 1 NC, 6A,Ctrl-V 24AC/DC,Vol-Rtg 250AC/DC,Screw

Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 2 enabling current paths, nominal input voltage: 24 V DC, plug-in screw terminal block.

2963718.jpg

Fetures of 2963718 Phoenix Contact PSR-SCP- 24UC/ESM4/2X1/1X2 - Safety relays:

• 2 channel control

• 1- and 2-channel control

• Up to Cat. 4/PL e according to EN ISO 13849-1, SIL 3 according to EN 62061, SIL 3 according to IEC 61508

• 2 enabling current paths, 1 signaling current path

• Single and two-channel control

• Up to Cat.4/PL e according to EN ISO 13849-1, SILCL 3 according to EN 62061, SIL 3 according to IEC 61508

Specification of PSR-SCP- 24UC/ESM4/2X1/1X2 - Safety relays:

Product type: Safety relays

Product family: PSRclassic

Item number: 2963718

Product key: DNA112

Application: Emergency stop/ Safety door

Control: 2-channel

Housing material: PA

Degree of protection: IP20

Rated control circuit supply voltage US: 24 V DC -15 % / +10 %

Power consumption at US: typ. 1.68 W (DC)

Rated control supply current IS: typ. 70 mA

Input voltage range in reference to UN: 0.85 ... 1.1

Typical input current at UN: 70 mA DC

Voltage at input/start and feedback circuit: approx. 24 V DC

Typical response time: 100 ms (Monitored/manual start)

Protective circuit: Surge protection; Suppressor diode

Contact switching type: 2 enabling current paths/ 1 signaling current path

Contact material: AgSnO2, + 0.2 µm Au

Maximum switching voltage: 250 V AC/DC

Minimum switching voltage: 10 V AC/DC

Limiting continuous current: 6 A (N/O contact)

Maximum inrush current: 6 A

Inrush current, minimum: 10 mA

Switching capacity min.: 100 mW

Mounting type: DIN rail mounting

Also we supply:

2866802 Phoenix Contact QUINT-PS/3AC/24DC/40 - Power supply unit

2900525 Phoenix Contact PSR-SCP- 24UC/ESAM4/2X1/1X2 - Safety relays

2866763 Phoenix Contact 2866763 QUINT-PS/1AC/24DC/10 Power Supply Unit

Welcome your inquiry.


Deutsch Espanol Francais Italiano Portugues Japanese Korean Arabic Russian